\(\mathcal{O}(\min(m,n))\). zipWith generalises zip by zipping with the function given as the first argument, instead of a tupling function.

zipWith (,) xs ys == zip xs ys
zipWith f [x1,x2,x3..] [y1,y2,y3..] == [f x1 y1, f x2 y2, f x3 y3..]

For example, zipWith (+) is applied to two lists to produce the list of corresponding sums:

>>> zipWith (+) [1, 2, 3] [4, 5, 6]
[5,7,9]

zipWith is right-lazy:

>>> let f = undefined
>>> zipWith f [] undefined
[]

zipWith is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The sortBy function is the non-overloaded version of sort. The argument must be finite.

>>> sortBy (\(a,_) (b,_) -> compare a b) [(2, "world"), (4, "!"), (1, "Hello")]
[(1,"Hello"),(2,"world"),(4,"!")]

The supplied comparison relation is supposed to be reflexive and antisymmetric, otherwise, e. g., for _ _ -> GT, the ordered list simply does not exist. The relation is also expected to be transitive: if it is not then sortBy might fail to find an ordered permutation, even if it exists.

\(\mathcal{O}(n)\). The genericLength function is an overloaded version of length. In particular, instead of returning an Int, it returns any type which is an instance of Num. It is, however, less efficient than length.

>>> genericLength [1, 2, 3] :: Int
3
>>> genericLength [1, 2, 3] :: Float
3.0

Users should take care to pick a return type that is wide enough to contain the full length of the list. If the width is insufficient, the overflow behaviour will depend on the (+) implementation in the selected Num instance. The following example overflows because the actual list length of 200 lies outside of the Int8 range of -128..127.

>>> genericLength [1..200] :: Int8
-56

The genericReplicate function is an overloaded version of replicate, which accepts any Integral value as the number of repetitions to make.

The genericTake function is an overloaded version of take, which accepts any Integral value as the number of elements to take.

The genericDrop function is an overloaded version of drop, which accepts any Integral value as the number of elements to drop.

The genericSplitAt function is an overloaded version of splitAt, which accepts any Integral value as the position at which to split.

The genericIndex function is an overloaded version of !!, which accepts any Integral value as the index.

Returns the size/length of a finite structure as an Int. The default implementation just counts elements starting with the leftmost. Instances for structures that can compute the element count faster than via element-by-element counting, should provide a specialised implementation.

Examples

>>> length []
0

>>> length ['a', 'b', 'c']
3
>>> length [1..]
* Hangs forever *

Since: base-4.8.0.0

Test whether the structure is empty. The default implementation is Left-associative and lazy in both the initial element and the accumulator. Thus optimised for structures where the first element can be accessed in constant time. Structures where this is not the case should have a non-default implementation.

Examples

>>> null []
True

>>> null [1]
False

>>> null [1..]
False

Since: base-4.8.0.0

\(\mathcal{O}(1)\). Extract the first element of a list, which must be non-empty.

>>> head [1, 2, 3]
1
>>> head [1..]
1
>>> head []
*** Exception: Prelude.head: empty list

WARNING: This function is partial. You can use case-matching, uncons or listToMaybe instead.

The group function takes a list and returns a list of lists such that the concatenation of the result is equal to the argument. Moreover, each sublist in the result is non-empty and all elements are equal to the first one. For example,

>>> group "Mississippi"
["M","i","ss","i","ss","i","pp","i"]

group is a special case of groupBy, which allows the programmer to supply their own equality test.

It's often preferable to use Data.List.NonEmpty.group, which provides type-level guarantees of non-emptiness of inner lists.

The groupBy function is the non-overloaded version of group.

When a supplied relation is not transitive, it is important to remember that equality is checked against the first element in the group, not against the nearest neighbour:

>>> groupBy (\a b -> b - a < 5) [0..19]
[[0,1,2,3,4],[5,6,7,8,9],[10,11,12,13,14],[15,16,17,18,19]]

It's often preferable to use Data.List.NonEmpty.groupBy, which provides type-level guarantees of non-emptiness of inner lists.

\(\mathcal{O}(n)\). filter, applied to a predicate and a list, returns the list of those elements that satisfy the predicate; i.e.,

filter p xs = [ x | x <- xs, p x]

>>> filter odd [1, 2, 3]
[1,3]

The unfoldr function is a `dual' to foldr: while foldr reduces a list to a summary value, unfoldr builds a list from a seed value. The function takes the element and returns Nothing if it is done producing the list or returns Just (a,b), in which case, a is a prepended to the list and b is used as the next element in a recursive call. For example,

iterate f == unfoldr (\x -> Just (x, f x))

In some cases, unfoldr can undo a foldr operation:

unfoldr f' (foldr f z xs) == xs

if the following holds:

f' (f x y) = Just (x,y)
f' z       = Nothing

A simple use of unfoldr:

>>> unfoldr (\b -> if b == 0 then Nothing else Just (b, b-1)) 10
[10,9,8,7,6,5,4,3,2,1]

The transpose function transposes the rows and columns of its argument. For example,

>>> transpose [[1,2,3],[4,5,6]]
[[1,4],[2,5],[3,6]]

If some of the rows are shorter than the following rows, their elements are skipped:

>>> transpose [[10,11],[20],[],[30,31,32]]
[[10,20,30],[11,31],[32]]

For this reason the outer list must be finite; otherwise transpose hangs:

>>> transpose (repeat [])
* Hangs forever *

Sort a list by comparing the results of a key function applied to each element. sortOn f is equivalent to sortBy (comparing f), but has the performance advantage of only evaluating f once for each element in the input list. This is called the decorate-sort-undecorate paradigm, or Schwartzian transform.

Elements are arranged from lowest to highest, keeping duplicates in the order they appeared in the input.

>>> sortOn fst [(2, "world"), (4, "!"), (1, "Hello")]
[(1,"Hello"),(2,"world"),(4,"!")]

The argument must be finite.

Since: base-4.8.0.0

cycle ties a finite list into a circular one, or equivalently, the infinite repetition of the original list. It is the identity on infinite lists.

>>> cycle []
*** Exception: Prelude.cycle: empty list
>>> cycle [42]
[42,42,42,42,42,42,42,42,42,42...
>>> cycle [2, 5, 7]
[2,5,7,2,5,7,2,5,7,2,5,7...

\(\mathcal{O}(\min(m,n))\). zip takes two lists and returns a list of corresponding pairs.

>>> zip [1, 2] ['a', 'b']
[(1,'a'),(2,'b')]

If one input list is shorter than the other, excess elements of the longer list are discarded, even if one of the lists is infinite:

>>> zip [1] ['a', 'b']
[(1,'a')]
>>> zip [1, 2] ['a']
[(1,'a')]
>>> zip [] [1..]
[]
>>> zip [1..] []
[]

zip is right-lazy:

>>> zip [] undefined
[]
>>> zip undefined []
*** Exception: Prelude.undefined
...

zip is capable of list fusion, but it is restricted to its first list argument and its resulting list.

\(\mathcal{O}(1)\). Decompose a list into its head and tail.

• If the list is empty, returns Nothing.
• If the list is non-empty, returns Just (x, xs), where x is the head of the list and xs its tail.

>>> uncons []
Nothing
>>> uncons [1]
Just (1,[])
>>> uncons [1, 2, 3]
Just (1,[2,3])

Since: base-4.8.0.0

\(\mathcal{O}(1)\). Extract the elements after the head of a list, which must be non-empty.

>>> tail [1, 2, 3]
[2,3]
>>> tail [1]
[]
>>> tail []
*** Exception: Prelude.tail: empty list

WARNING: This function is partial. You can use case-matching or uncons instead.

\(\mathcal{O}(n)\). Extract the last element of a list, which must be finite and non-empty.

>>> last [1, 2, 3]
3
>>> last [1..]
* Hangs forever *
>>> last []
*** Exception: Prelude.last: empty list

WARNING: This function is partial. You can use reverse with case-matching, uncons or listToMaybe instead.

\(\mathcal{O}(n)\). Return all the elements of a list except the last one. The list must be non-empty.

>>> init [1, 2, 3]
[1,2]
>>> init [1]
[]
>>> init []
*** Exception: Prelude.init: empty list

WARNING: This function is partial. You can use reverse with case-matching or uncons instead.

A strict version of foldl1.

\(\mathcal{O}(n)\). scanl is similar to foldl, but returns a list of successive reduced values from the left:

scanl f z [x1, x2, ...] == [z, z `f` x1, (z `f` x1) `f` x2, ...]

Note that

last (scanl f z xs) == foldl f z xs

>>> scanl (+) 0 [1..4]
[0,1,3,6,10]
>>> scanl (+) 42 []
[42]
>>> scanl (-) 100 [1..4]
[100,99,97,94,90]
>>> scanl (\reversedString nextChar -> nextChar : reversedString) "foo" ['a', 'b', 'c', 'd']
["foo","afoo","bafoo","cbafoo","dcbafoo"]
>>> scanl (+) 0 [1..]
* Hangs forever *

\(\mathcal{O}(n)\). scanl1 is a variant of scanl that has no starting value argument:

scanl1 f [x1, x2, ...] == [x1, x1 `f` x2, ...]

>>> scanl1 (+) [1..4]
[1,3,6,10]
>>> scanl1 (+) []
[]
>>> scanl1 (-) [1..4]
[1,-1,-4,-8]
>>> scanl1 (&&) [True, False, True, True]
[True,False,False,False]
>>> scanl1 (||) [False, False, True, True]
[False,False,True,True]
>>> scanl1 (+) [1..]
* Hangs forever *

\(\mathcal{O}(n)\). A strict version of scanl.

\(\mathcal{O}(n)\). scanr is the right-to-left dual of scanl. Note that the order of parameters on the accumulating function are reversed compared to scanl. Also note that

head (scanr f z xs) == foldr f z xs.

>>> scanr (+) 0 [1..4]
[10,9,7,4,0]
>>> scanr (+) 42 []
[42]
>>> scanr (-) 100 [1..4]
[98,-97,99,-96,100]
>>> scanr (\nextChar reversedString -> nextChar : reversedString) "foo" ['a', 'b', 'c', 'd']
["abcdfoo","bcdfoo","cdfoo","dfoo","foo"]
>>> force $ scanr (+) 0 [1..]
*** Exception: stack overflow

\(\mathcal{O}(n)\). scanr1 is a variant of scanr that has no starting value argument.

>>> scanr1 (+) [1..4]
[10,9,7,4]
>>> scanr1 (+) []
[]
>>> scanr1 (-) [1..4]
[-2,3,-1,4]
>>> scanr1 (&&) [True, False, True, True]
[False,False,True,True]
>>> scanr1 (||) [True, True, False, False]
[True,True,False,False]
>>> force $ scanr1 (+) [1..]
*** Exception: stack overflow

iterate f x returns an infinite list of repeated applications of f to x:

iterate f x == [x, f x, f (f x), ...]

Note that iterate is lazy, potentially leading to thunk build-up if the consumer doesn't force each iterate. See iterate' for a strict variant of this function.

>>> take 10 $ iterate not True
[True,False,True,False...
>>> take 10 $ iterate (+3) 42
[42,45,48,51,54,57,60,63...

iterate' is the strict version of iterate.

It forces the result of each application of the function to weak head normal form (WHNF) before proceeding.

repeat x is an infinite list, with x the value of every element.

>>> repeat 17
[17,17,17,17,17,17,17,17,17...

replicate n x is a list of length n with x the value of every element. It is an instance of the more general genericReplicate, in which n may be of any integral type.

>>> replicate 0 True
[]
>>> replicate (-1) True
[]
>>> replicate 4 True
[True,True,True,True]

takeWhile, applied to a predicate p and a list xs, returns the longest prefix (possibly empty) of xs of elements that satisfy p.

>>> takeWhile (< 3) [1,2,3,4,1,2,3,4]
[1,2]
>>> takeWhile (< 9) [1,2,3]
[1,2,3]
>>> takeWhile (< 0) [1,2,3]
[]

dropWhile p xs returns the suffix remaining after takeWhile p xs.

>>> dropWhile (< 3) [1,2,3,4,5,1,2,3]
[3,4,5,1,2,3]
>>> dropWhile (< 9) [1,2,3]
[]
>>> dropWhile (< 0) [1,2,3]
[1,2,3]

take n, applied to a list xs, returns the prefix of xs of length n, or xs itself if n >= length xs.

>>> take 5 "Hello World!"
"Hello"
>>> take 3 [1,2,3,4,5]
[1,2,3]
>>> take 3 [1,2]
[1,2]
>>> take 3 []
[]
>>> take (-1) [1,2]
[]
>>> take 0 [1,2]
[]

It is an instance of the more general genericTake, in which n may be of any integral type.

drop n xs returns the suffix of xs after the first n elements, or [] if n >= length xs.

>>> drop 6 "Hello World!"
"World!"
>>> drop 3 [1,2,3,4,5]
[4,5]
>>> drop 3 [1,2]
[]
>>> drop 3 []
[]
>>> drop (-1) [1,2]
[1,2]
>>> drop 0 [1,2]
[1,2]

It is an instance of the more general genericDrop, in which n may be of any integral type.

splitAt n xs returns a tuple where first element is xs prefix of length n and second element is the remainder of the list:

>>> splitAt 6 "Hello World!"
("Hello ","World!")
>>> splitAt 3 [1,2,3,4,5]
([1,2,3],[4,5])
>>> splitAt 1 [1,2,3]
([1],[2,3])
>>> splitAt 3 [1,2,3]
([1,2,3],[])
>>> splitAt 4 [1,2,3]
([1,2,3],[])
>>> splitAt 0 [1,2,3]
([],[1,2,3])
>>> splitAt (-1) [1,2,3]
([],[1,2,3])

It is equivalent to (take n xs, drop n xs) when n is not _|_ (splitAt _|_ xs = _|_). splitAt is an instance of the more general genericSplitAt, in which n may be of any integral type.

span, applied to a predicate p and a list xs, returns a tuple where first element is longest prefix (possibly empty) of xs of elements that satisfy p and second element is the remainder of the list:

>>> span (< 3) [1,2,3,4,1,2,3,4]
([1,2],[3,4,1,2,3,4])
>>> span (< 9) [1,2,3]
([1,2,3],[])
>>> span (< 0) [1,2,3]
([],[1,2,3])

span p xs is equivalent to (takeWhile p xs, dropWhile p xs)

break, applied to a predicate p and a list xs, returns a tuple where first element is longest prefix (possibly empty) of xs of elements that do not satisfy p and second element is the remainder of the list:

>>> break (> 3) [1,2,3,4,1,2,3,4]
([1,2,3],[4,1,2,3,4])
>>> break (< 9) [1,2,3]
([],[1,2,3])
>>> break (> 9) [1,2,3]
([1,2,3],[])

break p is equivalent to span (not . p).

reverse xs returns the elements of xs in reverse order. xs must be finite.

>>> reverse []
[]
>>> reverse [42]
[42]
>>> reverse [2,5,7]
[7,5,2]
>>> reverse [1..]
* Hangs forever *

and returns the conjunction of a container of Bools. For the result to be True, the container must be finite; False, however, results from a False value finitely far from the left end.

Examples

>>> and []
True

>>> and [True]
True

>>> and [False]
False

>>> and [True, True, False]
False

>>> and (False : repeat True) -- Infinite list [False,True,True,True,...
False

>>> and (repeat True)
* Hangs forever *

or returns the disjunction of a container of Bools. For the result to be False, the container must be finite; True, however, results from a True value finitely far from the left end.

Examples

>>> or []
False

>>> or [True]
True

>>> or [False]
False

>>> or [True, True, False]
True

>>> or (True : repeat False) -- Infinite list [True,False,False,False,...
True

>>> or (repeat False)
* Hangs forever *

Determines whether any element of the structure satisfies the predicate.

Examples

>>> any (> 3) []
False

>>> any (> 3) [1,2]
False

>>> any (> 3) [1,2,3,4,5]
True

>>> any (> 3) [1..]
True

>>> any (> 3) [0, -1..]
* Hangs forever *

Determines whether all elements of the structure satisfy the predicate.

Examples

>>> all (> 3) []
True

>>> all (> 3) [1,2]
False

>>> all (> 3) [1,2,3,4,5]
False

>>> all (> 3) [1..]
False

>>> all (> 3) [4..]
* Hangs forever *

notElem is the negation of elem.

Examples

>>> 3 `notElem` []
True

>>> 3 `notElem` [1,2]
True

>>> 3 `notElem` [1,2,3,4,5]
False

>>> 3 `notElem` [1..]
False

>>> 3 `notElem` ([4..] ++ [3])
* Hangs forever *

\(\mathcal{O}(n)\). lookup key assocs looks up a key in an association list. For the result to be Nothing, the list must be finite.

>>> lookup 2 []
Nothing
>>> lookup 2 [(1, "first")]
Nothing
>>> lookup 2 [(1, "first"), (2, "second"), (3, "third")]
Just "second"

Map a function over all the elements of a container and concatenate the resulting lists.

Examples

>>> concatMap (take 3) [[1..], [10..], [100..], [1000..]]
[1,2,3,10,11,12,100,101,102,1000,1001,1002]

>>> concatMap (take 3) (Just [1..])
[1,2,3]

List index (subscript) operator, starting from 0. It is an instance of the more general genericIndex, which takes an index of any integral type.

>>> ['a', 'b', 'c'] !! 0
'a'
>>> ['a', 'b', 'c'] !! 2
'c'
>>> ['a', 'b', 'c'] !! 3
*** Exception: Prelude.!!: index too large
>>> ['a', 'b', 'c'] !! (-1)
*** Exception: Prelude.!!: negative index

WARNING: This function is partial. You can use atMay instead.

zip3 takes three lists and returns a list of triples, analogous to zip. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zipWith3 function takes a function which combines three elements, as well as three lists and returns a list of the function applied to corresponding elements, analogous to zipWith. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

zipWith3 (,,) xs ys zs == zip3 xs ys zs
zipWith3 f [x1,x2,x3..] [y1,y2,y3..] [z1,z2,z3..] == [f x1 y1 z1, f x2 y2 z2, f x3 y3 z3..]

unzip transforms a list of pairs into a list of first components and a list of second components.

>>> unzip []
([],[])
>>> unzip [(1, 'a'), (2, 'b')]
([1,2],"ab")

The unzip3 function takes a list of triples and returns three lists, analogous to unzip.

>>> unzip3 []
([],[],[])
>>> unzip3 [(1, 'a', True), (2, 'b', False)]
([1,2],"ab",[True,False])

The find function takes a predicate and a structure and returns the leftmost element of the structure matching the predicate, or Nothing if there is no such element.

Examples

>>> find (> 42) [0, 5..]
Just 45

>>> find (> 12) [1..7]
Nothing

The dropWhileEnd function drops the largest suffix of a list in which the given predicate holds for all elements. For example:

>>> dropWhileEnd isSpace "foo\n"
"foo"

>>> dropWhileEnd isSpace "foo bar"
"foo bar"

dropWhileEnd isSpace ("foo\n" ++ undefined) == "foo" ++ undefined

Since: base-4.5.0.0

\(\mathcal{O}(\min(m,n))\). The stripPrefix function drops the given prefix from a list. It returns Nothing if the list did not start with the prefix given, or Just the list after the prefix, if it does.

>>> stripPrefix "foo" "foobar"
Just "bar"

>>> stripPrefix "foo" "foo"
Just ""

>>> stripPrefix "foo" "barfoo"
Nothing

>>> stripPrefix "foo" "barfoobaz"
Nothing

The elemIndex function returns the index of the first element in the given list which is equal (by ==) to the query element, or Nothing if there is no such element. For the result to be Nothing, the list must be finite.

>>> elemIndex 4 [0..]
Just 4

The elemIndices function extends elemIndex, by returning the indices of all elements equal to the query element, in ascending order.

>>> elemIndices 'o' "Hello World"
[4,7]

The findIndex function takes a predicate and a list and returns the index of the first element in the list satisfying the predicate, or Nothing if there is no such element. For the result to be Nothing, the list must be finite.

>>> findIndex isSpace "Hello World!"
Just 5

The findIndices function extends findIndex, by returning the indices of all elements satisfying the predicate, in ascending order.

>>> findIndices (`elem` "aeiou") "Hello World!"
[1,4,7]

\(\mathcal{O}(\min(m,n))\). The isPrefixOf function takes two lists and returns True iff the first list is a prefix of the second.

>>> "Hello" `isPrefixOf` "Hello World!"
True
>>> "Hello" `isPrefixOf` "Wello Horld!"
False

For the result to be True, the first list must be finite; False, however, results from any mismatch:

>>> [0..] `isPrefixOf` [1..]
False
>>> [0..] `isPrefixOf` [0..99]
False
>>> [0..99] `isPrefixOf` [0..]
True
>>> [0..] `isPrefixOf` [0..]
* Hangs forever *

The isSuffixOf function takes two lists and returns True iff the first list is a suffix of the second.

>>> "ld!" `isSuffixOf` "Hello World!"
True
>>> "World" `isSuffixOf` "Hello World!"
False

The second list must be finite; however the first list may be infinite:

>>> [0..] `isSuffixOf` [0..99]
False
>>> [0..99] `isSuffixOf` [0..]
* Hangs forever *

The isInfixOf function takes two lists and returns True iff the first list is contained, wholly and intact, anywhere within the second.

>>> isInfixOf "Haskell" "I really like Haskell."
True
>>> isInfixOf "Ial" "I really like Haskell."
False

For the result to be True, the first list must be finite; for the result to be False, the second list must be finite:

>>> [20..50] `isInfixOf` [0..]
True
>>> [0..] `isInfixOf` [20..50]
False
>>> [0..] `isInfixOf` [0..]
* Hangs forever *

\(\mathcal{O}(n^2)\). The nub function removes duplicate elements from a list. In particular, it keeps only the first occurrence of each element. (The name nub means `essence'.) It is a special case of nubBy, which allows the programmer to supply their own equality test.

>>> nub [1,2,3,4,3,2,1,2,4,3,5]
[1,2,3,4,5]

If the order of outputs does not matter and there exists instance Ord a, it's faster to use map Data.List.NonEmpty.head . Data.List.NonEmpty.group . sort, which takes only \(\mathcal{O}(n \log n)\) time.

The nubBy function behaves just like nub, except it uses a user-supplied equality predicate instead of the overloaded == function.

>>> nubBy (\x y -> mod x 3 == mod y 3) [1,2,4,5,6]
[1,2,6]

\(\mathcal{O}(n)\). delete x removes the first occurrence of x from its list argument. For example,

>>> delete 'a' "banana"
"bnana"

It is a special case of deleteBy, which allows the programmer to supply their own equality test.

\(\mathcal{O}(n)\). The deleteBy function behaves like delete, but takes a user-supplied equality predicate.

>>> deleteBy (<=) 4 [1..10]
[1,2,3,5,6,7,8,9,10]

The \\ function is list difference (non-associative). In the result of xs \\ ys, the first occurrence of each element of ys in turn (if any) has been removed from xs. Thus (xs ++ ys) \\ xs == ys.

>>> "Hello World!" \\ "ell W"
"Hoorld!"

It is a special case of deleteFirstsBy, which allows the programmer to supply their own equality test.

The second list must be finite, but the first may be infinite.

>>> take 5 ([0..] \\ [2..4])
[0,1,5,6,7]
>>> take 5 ([0..] \\ [2..])
* Hangs forever *

The union function returns the list union of the two lists. It is a special case of unionBy, which allows the programmer to supply their own equality test. For example,

>>> "dog" `union` "cow"
"dogcw"

If equal elements are present in both lists, an element from the first list will be used. If the second list contains equal elements, only the first one will be retained:

>>> import Data.Semigroup
>>> union [Arg () "dog"] [Arg () "cow"]
[Arg () "dog"]
>>> union [] [Arg () "dog", Arg () "cow"]
[Arg () "dog"]

However if the first list contains duplicates, so will the result:

>>> "coot" `union` "duck"
"cootduk"
>>> "duck" `union` "coot"
"duckot"

union is productive even if both arguments are infinite.

The unionBy function is the non-overloaded version of union. Both arguments may be infinite.

The intersect function takes the list intersection of two lists. It is a special case of intersectBy, which allows the programmer to supply their own equality test. For example,

>>> [1,2,3,4] `intersect` [2,4,6,8]
[2,4]

If equal elements are present in both lists, an element from the first list will be used, and all duplicates from the second list quashed:

>>> import Data.Semigroup
>>> intersect [Arg () "dog"] [Arg () "cow", Arg () "cat"]
[Arg () "dog"]

However if the first list contains duplicates, so will the result.

>>> "coot" `intersect` "heron"
"oo"
>>> "heron" `intersect` "coot"
"o"

If the second list is infinite, intersect either hangs or returns its first argument in full. Otherwise if the first list is infinite, intersect might be productive:

>>> intersect [100..] [0..]
[100,101,102,103...
>>> intersect [0] [1..]
* Hangs forever *
>>> intersect [1..] [0]
* Hangs forever *
>>> intersect (cycle [1..3]) [2]
[2,2,2,2...

The intersectBy function is the non-overloaded version of intersect. It is productive for infinite arguments only if the first one is a subset of the second.

\(\mathcal{O}(n)\). The intersperse function takes an element and a list and `intersperses' that element between the elements of the list. For example,

>>> intersperse ',' "abcde"
"a,b,c,d,e"

The partition function takes a predicate and a list, and returns the pair of lists of elements which do and do not satisfy the predicate, respectively; i.e.,

partition p xs == (filter p xs, filter (not . p) xs)

>>> partition (`elem` "aeiou") "Hello World!"
("eoo","Hll Wrld!")

The mapAccumL function behaves like a combination of fmap and foldl; it applies a function to each element of a structure, passing an accumulating parameter from left to right, and returning a final value of this accumulator together with the new structure.

Examples

>>> mapAccumL (\a b -> (a + b, a)) 0 [1..10]
(55,[0,1,3,6,10,15,21,28,36,45])

>>> mapAccumL (\a b -> (a <> show b, a)) "0" [1..5]
("012345",["0","01","012","0123","01234"])

The mapAccumR function behaves like a combination of fmap and foldr; it applies a function to each element of a structure, passing an accumulating parameter from right to left, and returning a final value of this accumulator together with the new structure.

Examples

>>> mapAccumR (\a b -> (a + b, a)) 0 [1..10]
(55,[54,52,49,45,40,34,27,19,10,0])

>>> mapAccumR (\a b -> (a <> show b, a)) "0" [1..5]
("054321",["05432","0543","054","05","0"])

\(\mathcal{O}(n)\). The insert function takes an element and a list and inserts the element into the list at the first position where it is less than or equal to the next element. In particular, if the list is sorted before the call, the result will also be sorted. It is a special case of insertBy, which allows the programmer to supply their own comparison function.

>>> insert 4 [1,2,3,5,6,7]
[1,2,3,4,5,6,7]

\(\mathcal{O}(n)\). The non-overloaded version of insert.

The zip4 function takes four lists and returns a list of quadruples, analogous to zip. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zip5 function takes five lists and returns a list of five-tuples, analogous to zip. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zip6 function takes six lists and returns a list of six-tuples, analogous to zip. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zip7 function takes seven lists and returns a list of seven-tuples, analogous to zip. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zipWith4 function takes a function which combines four elements, as well as four lists and returns a list of their point-wise combination, analogous to zipWith. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zipWith5 function takes a function which combines five elements, as well as five lists and returns a list of their point-wise combination, analogous to zipWith. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zipWith6 function takes a function which combines six elements, as well as six lists and returns a list of their point-wise combination, analogous to zipWith. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The zipWith7 function takes a function which combines seven elements, as well as seven lists and returns a list of their point-wise combination, analogous to zipWith. It is capable of list fusion, but it is restricted to its first list argument and its resulting list.

The unzip4 function takes a list of quadruples and returns four lists, analogous to unzip.

The unzip5 function takes a list of five-tuples and returns five lists, analogous to unzip.

The unzip6 function takes a list of six-tuples and returns six lists, analogous to unzip.

The unzip7 function takes a list of seven-tuples and returns seven lists, analogous to unzip.

The deleteFirstsBy function takes a predicate and two lists and returns the first list with the first occurrence of each element of the second list removed. This is the non-overloaded version of (\\).

The second list must be finite, but the first may be infinite.

The inits function returns all initial segments of the argument, shortest first. For example,

>>> inits "abc"
["","a","ab","abc"]

Note that inits has the following strictness property: inits (xs ++ _|_) = inits xs ++ _|_

In particular, inits _|_ = [] : _|_

inits is semantically equivalent to map reverse . scanl (flip (:)) [], but under the hood uses a queue to amortize costs of reverse.

\(\mathcal{O}(n)\). The tails function returns all final segments of the argument, longest first. For example,

>>> tails "abc"
["abc","bc","c",""]

Note that tails has the following strictness property: tails _|_ = _|_ : _|_

The subsequences function returns the list of all subsequences of the argument.

>>> subsequences "abc"
["","a","b","ab","c","ac","bc","abc"]

This function is productive on infinite inputs:

>>> take 8 $ subsequences ['a'..]
["","a","b","ab","c","ac","bc","abc"]

The permutations function returns the list of all permutations of the argument.

>>> permutations "abc"
["abc","bac","cba","bca","cab","acb"]

The permutations function is maximally lazy: for each n, the value of permutations xs starts with those permutations that permute take n xs and keep drop n xs.

This function is productive on infinite inputs:

>>> take 6 $ map (take 3) $ permutations ['a'..]
["abc","bac","cba","bca","cab","acb"]

Note that the order of permutations is not lexicographic. It satisfies the following property:

map (take n) (take (product [1..n]) (permutations ([1..n] ++ undefined))) == permutations [1..n]

The sort function implements a stable sorting algorithm. It is a special case of sortBy, which allows the programmer to supply their own comparison function.

Elements are arranged from lowest to highest, keeping duplicates in the order they appeared in the input.

>>> sort [1,6,4,3,2,5]
[1,2,3,4,5,6]

The argument must be finite.

Produce singleton list.

>>> singleton True
[True]

Since: base-4.15.0.0

The isSubsequenceOf function takes two lists and returns True if all the elements of the first list occur, in order, in the second. The elements do not have to occur consecutively.

isSubsequenceOf x y is equivalent to elem x (subsequences y).

>>> isSubsequenceOf "GHC" "The Glorious Haskell Compiler"
True
>>> isSubsequenceOf ['a','d'..'z'] ['a'..'z']
True
>>> isSubsequenceOf [1..10] [10,9..0]
False

For the result to be True, the first list must be finite; for the result to be False, the second list must be finite:

>>> [0,2..10] `isSubsequenceOf` [0..]
True
>>> [0..] `isSubsequenceOf` [0,2..10]
False
>>> [0,2..] `isSubsequenceOf` [0..]
* Hangs forever*

Since: base-4.8.0.0

Monads that also support choice and failure.

The Monad class defines the basic operations over a monad, a concept from a branch of mathematics known as category theory. From the perspective of a Haskell programmer, however, it is best to think of a monad as an abstract datatype of actions. Haskell's do expressions provide a convenient syntax for writing monadic expressions.

Instances of Monad should satisfy the following:

Left identity

return a >>= k = k a

Right identity

m >>= return = m

Associativity

m >>= (\x -> k x >>= h) = (m >>= k) >>= h

Furthermore, the Monad and Applicative operations should relate as follows:

• pure = return

• m1 <*> m2 = m1 >>= (\x1 -> m2 >>= (\x2 -> return (x1 x2)))

The above laws imply:

• fmap f xs  =  xs >>= return . f

• (>>) = (*>)

and that pure and (<*>) satisfy the applicative functor laws.

The instances of Monad for lists, Maybe and IO defined in the Prelude satisfy these laws.

A type f is a Functor if it provides a function fmap which, given any types a and b lets you apply any function from (a -> b) to turn an f a into an f b, preserving the structure of f. Furthermore f needs to adhere to the following:

Identity

fmap id == id

Composition

fmap (f . g) == fmap f . fmap g

Note, that the second law follows from the free theorem of the type fmap and the first law, so you need only check that the former condition holds. See https://www.schoolofhaskell.com/user/edwardk/snippets/fmap or https://github.com/quchen/articles/blob/master/second_functor_law.md for an explanation.